When coverage is difficult to estimate, add more rather than less when doing DIY wall painting. You can always pour the leftover back into cans. For large jobs, use the bucket and a roller screen rather than a roller tray. It’s much faster to load your roller with the screen than to use a roller pan. Simply dunk the roller into the paint bucket, then roll it along the screen until it stops dripping.
When you refinish your existing cabinet doors, you get a whole new look without the astronomical costs normally associated with a kitchen remodel. It’s a much smarter way to update your space, especially if your cabinets are still in good condition. It doesn’t make sense to throw out perfectly good materials, just because you’re tired of the color.
Sorry it is difficult to trust almost anyone in the trades. It is easier to do the work myself and not deal with strangers in and around my house. When I have to hire someone I tell them up front that I'll be checking every detail, pay extra to purchase the materials myself, and if they don't want the job - well good! I always fine someone who will work with me as I pay a bonus for that.
This feared question gets to the heart of who will be performing work in your home and whether your home and belongings will be safe. Sadly, there have been numerous documented cases around the country where employees of a hired contractor have burglarized, injured, or even killed the homeowner. What’s worse, in most cases it was later found that the bad employee had a criminal background that was unknown to the employer. In learning about who will be performing the work in your home, you should ask additional questions about their hiring policy and whether they conduct criminal background checks.
My painter franchisee, who I got from Angie's List, must have found some shmucks on the corner to paint my house. I specifically said I wanted stain. First my house was painted the wrong color, Then it was painted with LATEX paint- not stain. Estimates to 'undo' the damage is around $10,000 and its not a guarantee that it will work. The work is at best amateurish. Many underpainted or not painted spots, drips, etc. They did the entire outside (scraping?, priming? caulking?, painting), cleaned up and left within the time I left for work and came home. There were thee of them (my neighbor told me) This was two years ago and I am still upset. Can't be fixed.
"Cutting in is an acquired skill, but it's something you can't do at all with a ratty brush," says Doherty. When cutting in on a wall, he loads his brush and spreads out the excess paint, then works the brush up to the line between wall and ceiling. A brush stroke that's too wide creates a hatband, or smooth brushed band, on the very top of the wall where it meets the ceiling. To avoid this, Dixon recommends rolling first and then cutting in with a brush. "A good roller can get within 1/2 inch of the ceiling," he says. "You'll save time by not brushing more then you have to." When painting baseboards, "a wide taping knife makes a good paint guard," says Span. "Just keep the blade clean to prevent drips from working around the edge of the knife."
Payment. Every client is different. Every job has it's own unique set of circumstances. I always start off the discussion with my clients saying that I'm flexible on how they would like to proceed with payments but that I prefer half down. I refuse to change order. Change orders are my last resort. Instead I ask questions at our initial meeting and try to be sure to cover all bases before I submit my estimate.
At Southern Painting, we not only do it all, we also do it right. We know there are other painters in Fort Worth, but many of them don’t take the time to do the prep work that we do. Plus, we promise to “leave no trace” when it comes to your home. We don’t disturb your belongings, so you can feel good about us being in your home. Contact us today to request a free estimate at your property. We look forward to hearing from you!
There are cases where apartment complexes allow you to choose from a color wheel of neutral hues before you move in. Some charge a fee for calling in a painter to do the walls, while others offer new paint as a benefit of moving in. If you're not a fan of neutral colors, consider looking for an apartment that allows you to paint the walls a more expressive tone. Otherwise you can invest in boldly colored furniture and posters.
Deciding which paint to use has gotten much easier now that acrylic latexes have pushed oil-based paints almost to extinction. The acrylics offer superior performance (they don't harden with age, the way oils do, so they move and breathe without blistering), they don't mildew as readily, and they emit fewer VOCs, so they comply with new air-quality regulations. They also work over both oil- and water-based primers.
The perfect roller would hold a roomful of paint, leave the right amount of texture, wouldn't spray or fuzz, and would be easy to clean. Until somebody invents the ideal one, follow these tips to choose the right roller. "The longer the nap, the more paint the roller will hold, but it will also create more texture." says Dixon. "A 1/2-inch nap lamb's-wool roller holds plenty of paint without too much texture," says Dixon. "Less expensive rollers can work," says Span. "Just wash them first in dishwashing liquid to remove any stray fibers." Most of the pros we spoke with prefer 9-inch rollers over 18-inch models -- they are lighter, cheaper, and easier to use. Despite these shortcomings, Maceyunas swears by the wider roller. "The roller can do a whole wall in a few up and down strokes instead of in several dozen W and M strokes," he says.
Unless you like textured walls, don't paint over dust. Wash the walls with trisodium phosphate (TSP) or a mild cleaner, like Jasco's TSP No-Rinse Substitute. For smoke-stained walls, Toto uses a 50/50 solution of bleach and water. To clean a wall, use two buckets. Load up your rag or sponge from your cleaning-solution bucket, and scrub. Before redipping, rinse the sponge in a second bucket filled with clean water.
The color scheme that is chosen for the home creates the initial impression that an individual has of the premises as a whole. Whether complimentary or unflattering colors are selected, the house will gain an identity of its own when the paint is applied. There are many times that a homeowner misses opportunities to accentuate positive attributes that the home has to offer by failing to choose the best exterior paint colors.
It is often necessary to have a rental property painted -- whether it's to make it your own before you move in or to clean it up for someone new when you move out. Some buildings and landlords have pre-selected painters, while others will contract companies to paint on an as-needed basis. If your landlord or building doesn't have a pre-selected painter, see if you may be allowed to paint the walls yourself. If you're moving in and selecting a non-neutral color, understand that your landlord may require you to repaint the walls the original color when you move out -- and ensure that you're ready to make that investment down the road.
Climate is another factor to consider. Sunlight, wind, rain and salty weather can all wear out exterior paint. Oil-based paint is durable against wind, rain and temperature changes, but sunlight tends to degrade it. Alkyd paint chalks and sheds very thin layers when it begins to wear. Latex paint is the more durable option for very sun-drenched and relatively dry climate areas. Latex paint with high vinyl content should be avoided, however. Acrylic resin is by far the more durable binder for outdoor latex paint.
The question, “how is your warranty program funded?” will probably get you some puzzled responses. The fact is, most contractors have never even considered how to pay the expenses associated with warranty callbacks, and some contractors just seem to vanish when they get a warranty call. A professional contractor will be preparing for callbacks (they will happen, even to the best contractors) by including a line item in their budget for warranty work. Ask the question and see what kind of response you get. Sometimes, how the question is answered is more important than the answer itself!
When hiring a contractor it is always best to hire one who is personally referred to you by someone you trust. Hiring through ads or phone book is hit and miss. Check with your local paints stores, they know the good guys from the bottom feeders. Go to the stores that sell the high quality paints like Benjamin Moore(nonpareil), Pittsburg, Sherwin Williams or Glidden. Don't go the the big box stores for referrals, the people there don't know squat!
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.
Not only careful communication is essential, but we would greatly recommend, when you pick out your type and brand of paint that you go and pay for it, with the contractor's discount, which is given by Sherwin-Williams and most paint companies. Then you will know how much paint you purchased and the coverage. If it is possible, inspect the work of the painter daily.
Spills and spatters happen, regardless of how careful you are. It’s a lot easier to pre- pare for them than to wipe them out of your carpeting or off your wood floor later. All it takes is canvas drop cloths in your work area (a 4-ft. x 15-ft. cloth costs $15). The thick canvas stays in place, so you don’t need to tape it, and you can use it to cover any surface. Plastic drop cloths are slippery to walk on or set a ladder on and don’t stay in place. Even worse, paint spills on plastic stay wet, and they can end up on your shoes and get tracked through the house. Canvas is slippery on hard ﬂoors, so rosin paper ($10 for 400 sq. ft. at home centers) is better over vinyl, tile and hard- wood. Tape the sheets together and to the ﬂoor to provide a nonslip surface.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.