This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint. 

Contractors apply several layers of paint to achieve a suitable finish. They leave the first coat to dry for the recommended time and apply one or more finishing coats. They might choose paints with special qualities for different types of room. Manufacturers have developed paints for bathrooms or kitchens that have good resistance to moisture for example. When they have completed painting, they clear away any equipment and restore the area to its original condition.


Small random-orbit or pad sanders make this job go faster. (Wallis first covers these boundaries with Synkoloid patching compound so no edge is visible after sanding.) As shown, you want to make sure that there is a feathered, smooth transition from exposed wood to old paint. For areas that might get close scrutiny, you can follow up with a 100- or 120-grit rubdown to erase any scratches.
The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water. (You never use a sprayer and need to thin paint.?) If i was still in the industry I'd take the time to make a better article than this. Take this for a grain of slat. Use a reputable painter or someone you know you can trust or has been referred to you by someone you trust. I wouldn't hire anyone I had to watch like a hawk to make sure they're not screwing me.
The article was well-intended, but it makes it sound like painters are the crooks and consumers are innocent victims. That is blatantly un-true. Maybe there should be a follow-up article that educates consumers how not to be shysters by expecting a ton more than they said at the start, or not paying the balance of the job unless something else is done that was not in the contract. Tradesmen have a rough road when dealing with consumers that have short arms but long lists of by-the-way items. No, I'm not a painter...
With that said, here's the reality of that particular scenario. Painters do put water in the paint, but not for reasons you would think. Some materials need to have their viscosity manipulated in order to slow drying time, allowing gravity to 'smooth' out the product for a better finish. It also prevents 'drags' and 'sausages'. I personally try not to do it too often, but from time to time I have to. I want my client to have a proper finish.
Not only do we give you beautiful color, but our skilled San Antonio painting contractors also provide professional level craftsmanship each step of the way, so that your new paint job lasts. We handle the hard work, while you focus on relaxing. Give us a call or fill out our form to schedule a fast, no-pressure walk through of your home or business, so we can give you the best possible pricing!
Here is where this affects you as a consumer. You select a painter with a contract that says 2 coats, $500 down. You give the company the deposit and pick your colors a couple of days before the project starts. The painter goes to the store with your colors and figures out they are deep base. He (or she) not only needs to charge you more for the paint, but he also needs to charge you for a dark gray primer coat. Ninety nine percent of the time that primer coat is going to be really, really expensive since you already gave a deposit. 

Dave, you said it best! Every pro painting contractor truly worth their salt would and should cut and paste exactly what you say here about where customary and legitimate practices and expectations should be in regards to what customers should expect from contractors and how contractors should professionally deal with their customers. By the way, Dave, if you work in the Atlanta area, I would like to hire you! Thank you for your valuable advice!

to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.

Once work begins, hold brief daily meetings to discuss the job and schedule and quash any misunderstandings. If there are surprises, seek middle ground. No contract can anticipate every possibility. Materials may be unavailable. Large chunks of rotten siding may crumble along with the old paint. Exterior jobs may be stopped cold by a week of steady rain. But know that you'll pay extra if you change your mind about a color after the trim is already painted or otherwise add tasks to the project.
Once work begins, hold brief daily meetings to discuss the job and schedule and quash any misunderstandings. If there are surprises, seek middle ground. No contract can anticipate every possibility. Materials may be unavailable. Large chunks of rotten siding may crumble along with the old paint. Exterior jobs may be stopped cold by a week of steady rain. But know that you'll pay extra if you change your mind about a color after the trim is already painted or otherwise add tasks to the project.

basic formula? single color exterior labor only ranges from $0.85 to $0.95 per sq foot as a BASE starting point. Prices go up depending on multiple colors, slope of surrounding areas, multiple stories..etc.Some painters charge per window to mask off. Ive seen $25 a window to $50.  Interiors without flooring can be factored the same way. When you start having to do multiple colors, cut ins, masking, room isolation...etc. the price jumps considerably. I always start with a base of $0.85 a sq foot and figure it out from there. the season plays a major role too. paint and materials are charged separatly and are typically marked up at a minimum of 15%. I always tell clients this. that way they pick the paint out they want and what quality they want as well. Anyways...thats your base. 1250 sq foot home @ .0.95 a ft = $1,187.50 (one color). Pressure washing, Add another $45-$55 per hour. a 1250 sq ft home is not going to take longer than 2-3 hours if its a single story. 

There are numerous factors to consider prior to pricing that can add additional costs to the painting of your home. It was previously stated that the surface material, condition of existing surface, home features, special materials that may need to be utilized, and any additional prep work that might be required can effect the final cost. The location also effect the overall condition of the home or business moving from the Northwoods , lake areas to urban homes.


At Supreme Painting, you can feel good about hiring professional painters. An Exceptional Customer Experience is our #1 Priority and we get the job done right and as scheduled. Your painting project will be done quickly with as little impact on your daily routine as possible. We respect your time. Other than the beautiful new look of your space, you won’t even know that we’ve been there. per9sua7sionds3n
×