The perfect roller would hold a roomful of paint, leave the right amount of texture, wouldn't spray or fuzz, and would be easy to clean. Until somebody invents the ideal one, follow these tips to choose the right roller. "The longer the nap, the more paint the roller will hold, but it will also create more texture." says Dixon. "A 1/2-inch nap lamb's-wool roller holds plenty of paint without too much texture," says Dixon. "Less expensive rollers can work," says Span. "Just wash them first in dishwashing liquid to remove any stray fibers." Most of the pros we spoke with prefer 9-inch rollers over 18-inch models -- they are lighter, cheaper, and easier to use. Despite these shortcomings, Maceyunas swears by the wider roller. "The roller can do a whole wall in a few up and down strokes instead of in several dozen W and M strokes," he says.
I was a painting contractor for many years and never asked for a deposit upfront. A good contractor should have great credit with his suppliers and an even better contract if the deal should go south before the job is done. Get to know your customer and explain how each paint covers so they understand fully before you have to apply 3 or 4 coats. If you didn't bid your job right and the client has already signed the contract then that is on you not the client. Yes I haven had to eat the difference but the client was happy and a return customer for years so I made up for it.
I've seen this article sent out 4 times now. It's out dated in terms of today's "Scams." Paint stores haven't charged more money for deeper paint colors in over 15 years. Also Water downed paint? Seriously? That would never happen in the real world. And Wall repair? what painter would ever not assume wall repair as included? This article is a waste of time and should be taken down or edited to reflect actual scams of todays times.
You can save a bundle by doing the labor yourself. The biggest DIY expense is paint. Other expenses include buying or renting supplies and equipment, like caulk, primer, brushes, rollers, tarps and ladders or scaffolding. Freeman advises applying paint with brushes, not a sprayer. “If you overspray all the window frames and overspray your shingles and your sidewalks and the brick on the front of the house, you do damage that is not easily fixed,” he says.
It is one of our core values to ensure our clients’ dreams for their home comes true. So often, clients come to us for a new coat of paint or a repair but what they really want is so much more. We understand your house is your home and that when it is time for change or for a repair, you want a crew that will take care to make your home look its best.
When I had my interior painting done, after clearing out all of the furniture, myself, I also removed all of the wall plates in all the rooms to be painted. They were a beige color and probably yellowed. The wall was originally an off white and I had it painted a light-mid grey, so those wall plates would look terrible. After pricing replacement plates, switches and outlets (Would have been way too expensive to replace all of them), I decided to just paint all of the wall plates, switches and outlets (Used just a black gloss spray paint). I sprayed the plates outside and used a small brush on the switches and outlets. It worked out just fine and the blacks plates, etc compliment the wall color. It has been 7 years and the plates, switches, outlets are holding up well.
Most painters have no problem painting doors in place, but they recommend you lay the door on sawhorses and work horizontally. If you have a paneled door, start with the panels and work from the outside edges in toward the center. "Watch the corners — paint loves to puddle," warns Dixon. While the paint is still wet, lightly "tip off" the panel with an almost dry brush. (Tipping off is pulling the brush over the surface to level out the finish.) When painting the stiles (vertical) and rails (horizontal) just follow the grain of the wood. When the grain changes abruptly, for instance, where the rail meets the stile, don't stop your brush stroke — you'll only leave a lump of paint. Apply paint across the joint with a full stroke, and then tip off the overlapping section by pulling the brush in the direction of the grain. "Make sure the door is dry before painting the opposite side or rehanging it," says Maceyunas.
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
A professional painter will help you select an exterior paint designed for long-lasting results, superior protection, and ample coverage. Higher quality paint requires fewer coats and lasts far longer, saving you money down the road. Oil or latex paints in a flat/matte or satin finish make excellent choices for the exterior of your home. These paints will endure extreme weather conditions, can be customized to your specific climate, and are ideal for painting siding.
Painters often tint primer close to the color of the top coat, but Wallis thinks that's a recipe for "holidays," or missed spots. Instead, he tints his primer a contrasting color. "If I can see the color coming through, I know I need to apply more paint," he says. On the cottage shown in this story, he chose a gray-blue primer to go under a peach top coat.
Home Painter Company